How To Fix - LG MFL68280101 Manual De Instalación

Installation
Installation of filters
1) Detach two attached tapes from the plasma
filter.

How To Fix

The wall you select should be strong and solid enough to prevent vibration
1. Mount the installation plate on the wall with
type "A" screws. If mounting the unit on a concrete wall, use anchor bolts.
• Mount the installation plate horizontally by aligning the centerline using a level.
2. Measure the wall and mark the centerline. It is also important to use caution concerning the lo-
cation of the installation plate-routing of the wiring to power outlets is through the walls typically.
Drilling the hole through the wall for piping connections must be done safely.
<Type 1>
Chassis
Hook
90
(3 17/32)
Ø70
(2 3/4)
Left rear piping
<Type 3>
Installation Plate
Type "A" Screws
Unit Outline
442(17 13/32)
Enganche
del chasis
Ø70
(2 3/4)
Left rear piping
133(5 1/4)
175(6 7/8)
18 Multi Air Conditioner
Installation Plate
Type "A"
(2 3/4)
Right rear piping
Place a level on raised tab
Right rear piping
442(17 13/32)
Installation Plate
95(5 3/4)
217(8 17/32)
<Type 2>
Chassis
Hook
70
Ø70
(2 3/4)
Ø70
(2 3/4)
<Type 4>
Installation Plate
Enganche
del chasis
Ø70 Ø70
(2 3/4) (2 3/4)
Left rear piping
69(2 23/32)
Installation Plate
Type "A"
133(5 1/4)
Left rear piping
Type "A" Screws
Place a level on raised tab
Unit Outline
460(18 1/8)
Installation Plate
Measuring Tape
105(4 1/8)
Measuring Tape
Hanger
Plasma Filter
Ø70
100(3 15/16)
(2 3/4)
Right rear piping
570(22 7/16)
Ø70
(2 3/4)
Right
rear
piping
56(2 7/32)
207(8 5/32)