Power Supply - LaserLiner BeamControl-Master BCM Instrucciones Para Su Uso

BeamControl-Master BCM
Working with the SensoCommander (optional)
The SensoCommander can recognise the laser beam
over long distances. Move the SensoCommander up
and down through the laser beam until the middle
display appears. Now mark the height on the all-round
marking groove. The Spotlite additionally shows the
measured height.
Universal mount (optional):
The receiver can be installed on levelling staffs with the aid of
the universal mount. To do this, insert the universal mount into
the laser receiver and secure on the levelling staff with the aid
of the screw. To release the universal mount from the laser
receiver, turn the quick release lock in the direction of the
arrow.

Power supply

Batteries
When the red LED is permanently flashing, the battery must be changed.
Connection of an external power supply unit
When connecting an external power supply unit the batteries will be bridged. It is not
possible to charge storage batteries with the power supply unit in the rotation unit.
Please use only a suitable Laserliner mains unit.
Note: Batteries should not be exposed to excessive heat, such as sunshine, fire or the
like. Moreover, dry batteries must not be charged. Do not throw spent batteries into
your household garbage. You can take them to a collecting point for spent batteries
or special waste. Please, inform yourself about this at your community. You can deliver
batteries with the recycling symbol to the selling shops, sales agencies or technical
service stations.
14
i
ENGLISH
2 1