Computer Remote Control Features; Operating Instructions; Flash Trigger - Elinchrom EL-Skyport Instrucciones De Funcionamiento

Computer Remote control features

• Wireless Remote Control of all RX features and extra options are available with
EL-Skyport 3.0 Software (i.e. Delay flash, Flash Stand-by, special modelling lamp features
and more..)
• Real Time Feedback from RX units with EL-Skyport software. WYSIWYG: What you see
is what you get!
Plug and Play auto detection with EL-Skyport Software (no manual unit addressing is
•
necessary).
Experience the simplicity and convenience of this professional, and powerful wireless device.
Note :
Usable shutter speed and distance range are both influenced by reflections (ceilings, walls, floor, furniture
and other equipment) and possible interference from other 2.4 GHz electronic equipment. For best
performance the Transmitter and Receiver antenna should have direct sight, without any walls or objects
in-between them.

Operating Instructions

Flash trigger

1. Plug in the Transceiver RX to your ELINCHROM RX flash unit.
2. Check for the correct Group-Switch setting and the correct Frequency Channel setting on
all EL-Skyport modules.
3. Switch the ELINCHROM RX Flash Unit ON. For TEST Press the "TEST"
push button on EL-Skyport Transmitter.
3