Computer Remote Control - Elinchrom EL-Skyport Instrucciones De Funcionamiento

Fig. 1
RX socket

Computer Remote control

1. Plug in the Transceiver RX to your ELINCHROM RX flash unit.
2. Check the correct Frequency Channel on the Transceiver RX and the frequency
setting in the EL-Skyport software (Note: with ERS 1.0 software, only channel 1 is
avilable).
3. Switch ON the ELINCHROM RX Flash Unit.
4. Start EL-Skyport 3.0 Software and wait until RX unit is automatically found and added
to the units list. (For ERS 1.0 Software you have to start "Scan Net" to find the RX
unit. If any problem please start the "Studio Wizard" and read ERS Help for more
detailed information)
5. Now you can change all RX unit settings plus some extra features. Please read the
EL Skyport (or ERS) help documentation for further information.
4
Frequency channel
selector
Group switch
Flexible swivel
Antenna 360°