Connector
S E C U R I T Y C A B L E S L O T
for installing antitheft devices are usually included with the device. For more information, see "Securing the Media
Base" on page 13.
10
Media Base Setup Guide
Description
/
H E A D P H O N E
S P E A K E R C O N N E C T O R
or speakers. The connector is a stereo output connector.
A C
A D A P T E R C O N N E C T O R
media base and to AC power to convert AC power to the DC
power required by the media base. You can connect the AC
adapter with your media base either turned on or off. For more
information, see "Setting Up Your Media Base" on page 12.
CAUTION:
If you are using a multiple-outlet power strip,
use caution when you plug the AC adapter power cable into
the power strip. Some power strips may allow you to insert
the connector incorrectly. Incorrect insertion of the power
connector could result in permanent damage to your media
base as well as risk of electric shock and/or fire. Ensure
that you insert the ground prong of the power plug into the
mating ground contact of the power strip.
NOTICE:
When you disconnect the AC adapter from the
media base, hold the adapter cable connector, not the cable
itself, and pull firmly but gently to avoid damaging the cable.
— Lets you attach a commercially available antitheft device to the media base. Instructions
— Connects headphones
— Connects an AC adapter to the