4) MOTION DETECTION RECORDING
(1) Power on the device by holding down the Power On/Off Button for 3
seconds.
(2) Press the Power On/Off Button once and the device will automatically enter
into motion detection mode.
(3) The indicator light will flash red 6 times then turn off indicating the device
will record video automatically when it detects motion.
(4) To stop motion detection mode, press the Power On/Off Button once and
the device will enter into standby mode and the indicator light will be solid red.
5) VIDEO/PHOTO FILE UPLOADS
(1) Connect the camera to a proper PC computer USB port with the USB cable
provided.
(2) The camera will be recognized as a removable disk drive.
(3) All of your video and photo files can be accessed in the drive.
6) SET THE DATE/TIME STAMP
(1) Connect the camera to a proper PC computer USB port with the USB
cable.
(2) Removable disk drive folder appears
(3) Click on the drive in the root directory and inside the root directory, find the
time.txt file.
(4) Open it and rewrite the desired date and time with the correct time format:
The format should be: Year-Month-Date Hour:Minute:Second
Save this file and do not change the file format.
(5) Restart the camera and the system will upgrade the program automatically.
7) CHARGING
(1) Connect the camera to a PC computer or a DC5V charger adapter
(recommended) with the USB cable provided.
(2) The red light indicator will flash during the charging process.
(3) Camera is fully charged when the indicator light is solid red.
(4) It will take up to 8 hours to obtain a full charge.
(5) The camera can record videos for 6 hours continuously with a fully charged
battery.