Kenmore 122.33492410 Manual De Uso Y Cuidado página 20

d. Loosen but not remove the 2 screws that are pre-
attached to the side burner gas valve. Insert the
valve stem and two screws through the
corresponding holes in the control panel. Align the
screws on the valve with the large side of the holes
on the bezel and slide the screws down to smaller
holes and tighten the screws to secure.
e. Insert the sear side burner and align with the
orifice.
f. Return and secure the burner to the shelf by
inserting and tightening the two previously removed
screws. Return and secure the ignition electrode to
the shelf by inserting and tightening the previously
removed screws.
g. Plug side burner ignition wire from grill head into
ignition electrode wire hanging from underside of
side burner.
h. Return cooking grate to side burner shelf. Insert
side burner grease tray into position below side
burner shelf.
20