Philips SmartSleep Instrucciones De Uso página 19

Cleaning
Cleaning the sensor
The final vibration indicates that the reset was
successful and that the data has been
removed.
2 sec.
After the reset, the adaptation phase is also
active again (see 'Adaptation phase'), as
indicated by the small dot on the display of
the sensor.
Warning: Do not immerse the sensor in
water and do not rinse it under the tap.
Warning: Never clean the sensor with
abrasive cleansing products or (aggressive)
liquids.
1 Clean the sensor with a dry cloth after use,
if needed.
English
5 sec.
21
3 sec.