Jt-Ta Replacing The Heating Element; Jt-Ta Changing The Heater Hose Set - jbc RMSE-C Serie Manual De Usuario

JT-TA Replacing the Heating Element

Only perform this operation when the element is cold and the unit is disconnected from the mains.
1. Loosen the screw.
2. Pull the heating element away from the handle.
3. Connect the new heating element, ensuring its pushed all the way in.
4. Tighten the screw.
Handle
Ref. JT-A

JT-TA Changing the Heater Hose Set

1. Ensure that the tool is turned off.
2. Use a spanner to unscrew the connecting nut.
3. The tube end of the new heater must be inserted
so that the longitudinal rib fits into the groove.
5. Follow the same steps conversely.
Heating Element
Ref. 0014107 (230V)
0014105 (100V / 120V)
w w w.jbctools.com
Heating Hose Set
Ref. JT-T1A (100V / 120V)
JT-T2A (230V)
15