DR560 Changing Tips
This operation should be done while the tip is hot, not below 250°C, so that any tin left inside is in
molten state.
1. Removing
Unscrew the tip using the spanner
supplied.
2. Inserting
Fit the new tip and tighten with the
spanner to make sure it is air tight.
Compatible Tips
The DR560 works with C560 tips. Find the model that best suits your soldering needs in www.jbctools.com
Here are some C560 tips in real size (mm):
C560-001
ØA=1,4 ØB=0,6 Ømax. pin=0,4
C560-014
ØA=2,5 ØB=0,8 Ømax. pin=0,6
C560-004
ØA=3,2 ØB=1,3 Ømax. pin=1,1
C560-001
C560-014
C560-004
w w w.jbctools.com
A ø
B ø
C560-002
ØA=1,8 ØB=0,8 Ømax. pin=0,6
C560-003
ØA=2,7 ØB=1 Ømax. pin=0,8
C560-009
ØA=5 ØB=1,3 Ømax. pin=1,1
250ºC minimum
C560-002
C560-003
C560-009
21