Dr560 Tin Deposit Cleaning - jbc RMSE-C Serie Manual De Usuario

DR560 Tin Deposit Cleaning

1. Removing the lid
The lid must be removed with the DR560 in
vertical position.
3. Inserting the deposit
The deposit must be inserted with coil filter in
place, positioned between the 2 lines marked
on the tin deposit.
Then the whole unit must be closed by
screwing the lid.
Check
internal joint
Check filter
Lid
w w w.jbctools.com
2. Cleaning
Remove the coil to clean the inside of the
deposit with the stick supplied.
The filter and internal joint must be checked
and replaced if dirty or damaged.
Marks
23