Cadillac Fleetwood/Brougham 1990-1996; Cadillac Eldorado/Seville 1992-1995 - Metra 99-2011 Instrucciones De Instalación

Tab Instructions
Isuzu, Toyota
brackets. (Figure F) Cut (1) tab
highlighted on top left corner of
double DIN trim plate. (Figure G)
Continue to kit assembly
(Figure D)
(Figure H)

Cadillac Fleetwood/Brougham 1990-1996

(with factory brackets)
1. Locate the factory
wiring harness in
the dash. Metra
recommends using the
proper mating adapter
from Metra or AXXESS.
Re-connect the negative
battery terminal and
test the unit for proper
operation.
2. Using carriage bolts
and Keps nuts supplied,
mount the factory
brackets to the double
DIN trim plate/double
DIN bracket assembly,
keeping in mind which
bracket is top and which
one is bottom.
3. Reassemble dash
in reverse order of
disassembly.
(Figure A)
Kit Assembly 99-2011
Top Factory Bracket
TOP FACTORY BRACKET
Bottom Factory Bracket BOTTOM FACTORY BRACKET
23
Cadillac Eldorado/
Seville 1992-1995
1. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
2. Align the tabs on the bottom of the
1
double DIN trim plate with notches
in sub dash. (Figure A)
3. Secure with the (2) Carriage bolts
and (2) Kep nuts provided. (Figure A)
4. Reassemble dash in reverse order
of disassembly.
(Figure A)