Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cadillac Fleetwood/
Fleetwood Brougham
1990-1996
Radio bracket disassembly
1. Remove (4) 10mm nuts, (2) on top of the radio and
(2) on the bottom of the radio, that hold the factory
mounting brackets on. Save brackets and nuts for
kit assembly.
Continue to kit assembly
Top factory bracket
Remove 10mm nuts
Remove 10mm nuts
Bottom factory bracket
(Figure A)
Dash Disassembly 99-2011
Cadillac Eldorado/Seville
1992-1995
1. Using a panel removal
tool, pry out on the
1
radio trim ring and
remove. Use extreme
care when removing.
(Figure A)
2. Gently pry up on the
ashtray/gear shifter
trim bezel and remove.
Caution: Some models
(Figure A)
are equipped with
bezels made of real wood.
3. Remove (2) nuts securing the
bottom of the factory head unit
and disconnect the wiring.
Continue to kit assembly
8
Chevrolet Blazer
2002-2005
(with DDIN)
2002-2004
(with DDIN)
Sonoma 2002-2004
Oldsmobile Bravada
1998-2001
1. Remove (2) 9/32" hex-head screws from the knee
bolster panel.
2. Pull down on the panel and remove the 9/32"
hex-head screw(s) exposed on the bottom of the
dash trim bezel. (Figure A)
3. Remove (1) Phillips screw above the instrument
cluster. (Figure A)
4. Unclip the dash
trim bezel and
remove. (Figure A)
5. Remove (2) 9/32"
hex-head screws
securing the
factory head unit
and disconnect
the wiring.
Continue to kit
assembly
(Figure A)
/S-10
, GMC
,
(with DDIN)
Publicidad
Tabla de contenido
