Pontiac Grand Am 1985-1991; Pontiac Grand Am 1992-1995; Pontiac Grand Am 1996-1998 - Metra 99-4544 Instrucciones De Instalación

Pontiac Grand Am
1985-1991
1. Carefully unsnap the front edge of the gear shifter
console panel.
2. Unsnap and remove the dash trim bezel. (Figure A)
3. Remove the hardware securing the factory
mounting brackets to the factory head unit.
(Figure B)
4. Remove and retain the brackets.
Continue to kit assembly
(S10 application
shown as example)
(Figure A) (Figure B)
Dash Disassembly 99-4544
Pontiac Grand Am
1992-1995
1. Remove (6) 7mm hex-head screws from the driver's
side knee bolster panel and lower the panel.
2. Remove (4) Phillips screws from the glove box/
cupholder assembly.
3. Remove (1) 7mm hex-head screw from the left
corner of the dash trim bezel. (Figure A)
4. Loosen (2) 10mm nuts from the top of the factory
head unit, slide the unit out and disconnect the
wiring. (Figure A)
5. Remove the hardware securing the factory mounting
brackets to the factory head unit. (Figure B)
6. Remove and retain the brackets.
Continue to kit assembly
(S10 application
shown as example)
(Figure A) (Figure B)
25
Pontiac Grand Am
1996-1998
1. Remove (2) Phillips screws from the pocket.
2. Remove (2) Phillips screws above the instrument
cluster. (Figure A)
3. Unclip the dash trim bezel and remove.
4. Remove (3) 7mm hex-head screws securing the
factory head unit and disconnect the wiring.
5. Locate Bracket Set #9. (Figure B)
Continue to kit assembly
(Figure A) (Figure B)