Metra 99-4544 Instrucciones De Instalación página 29

Side mounting brackets:
Secure the mounting brackets to the radio housing
(through the center holes) with (2) carriage bolts
and (2) keps nuts or studs and nuts. (Figure D)
(Figure D)
4. For 2-Shaft head units:
(1) Slide the aftermarket head unit into the kit and
secure with shaft nuts. (Figure E)
For DIN head units:
(1) Cut and remove the shaft supports. (2) Slide
Kit Assembly 99-4544
All Vehicles
the DIN cage into the radio housing and secure by bending the
metal locking tabs down. (3) Slide the aftermarket head unit
into the cage until secure. (Figure F)
5. Locate the factory wiring harness in the dash. Metra
commends using the proper mating adapter from Metra or
AXXESS. Re-connect the negative battery terminal and test the
unit for proper operation.
6. Reassemble dash in reverse order of disassembly using screws
previously removed. (Figure G)
(Figure E)
29
(Figure F)
(Figure G)