When Connecting To Separately Sold Power Amp; When Connecting The External Video Component And The Display - Pioneer AVH-X7500BT Manual De Instalación

Section
01 Connecting the units

When connecting to separately sold power amp

Rear output
(REAR OUTPUT)
13 cm
Front output
(FRONT OUTPUT)
Subwoofer output
(SUBWOOFER OUTPUT)
17 cm
This product
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (5*)
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
The pin position of the ISO connector
will differ depending on the type of
vehicle. Connect 5* and 6* when Pin 5
is an antenna control type. In another
type of vehicle, never connect 5* and 6*.
Perform these connections when
using the optional amplifier.
4
En
To rear
output
13 cm
To front
output
To subwoofer
Power amp
output
(sold separately)
Power amp
Connect with RCA cables (sold separately)
(sold separately)
Power amp
(sold separately)
System remote control
Left Right
Subwoofer
Subwoofer
Front speaker Front speaker
Rear speaker Rear speaker
Connecting the units

When connecting the external video component and the display

Rear monitor output RCA cable (sold separately)
(REAR MONITOR OUTPUT)
13 cm
This product
Video input (VIDEO INPUT)
17 cm
Audio inputs
(AUDIO INPUT)
! It is necessary to change AV Input in the
system menu when connecting the external
video component.
This product's rear video output is for connec-
tion of a display to enable passengers in the rear
seats to watch the DVD, etc.
WARNING
! Never install a rear display in a location that is
visible to the driver while the vehicle is in motion.
To video input
Display with RCA
input jacks (sold
separately)
RCA cables (sold separately)
To video output
External video
component (sold
separately)
To audio outputs