Perry Easy Program Instrucciones De Instalación, Programación Y Modo De Empleo página 35

5.5 - SUMMER -WINTER
Your chronothermostat is factory-set as
"Winter" and displayed as:
In these conditions, the device (boiler) will be connected as described in the example below:
Example: Temperature setting:
Comfort temperature
Working temperature
Economy temperature
Anti-freeze temperature t
If the appliance is an air conditioner:
to set the "Summer" mode, displayed as:
Press
the appliance (air conditioner) will be connected as described in the example below:
Example:
Temperature setting:
Comfort temperature
Working temperature
Economy temperature
N.B.: if the anti-freeze setting is set within the 24 hr temperature range (digit non visible), the
chronothermostat will not turn the air conditioner on at the set time.
5.6 - Changing the hour, minutes, day of the week
(E.g. Standard Time/Daylight Saving Time)
/
DAY
Keep pressed for at least 4 seconds until the hour and minutes blink on the display.
!
If necessary, use to edit the hour and minutes.
!
In any case, press OK to confirm: the numbers of the hour and minutes will remain lit and the
dash pertaining to the day will blink.
!
If necessary, use to select the day of the week.
!
In any case, press OK to confirm.
The chronothermostat returns to the current program.
programs
Boiler operates at:
Room temperature lower
t1 20 °C
Room temperature lower
t2 18 °C
Room temperature lower
t3 16,5 °C
Room temperature lower
5 °C
Air conditioner operates at:
t1 20 °C Room temperature greater
t2 22 °C Room temperature greater
t3 23,5 °C Room temperature greater
Fig. 24
Functionality of the device is
confirmed when ON
than 20 °C
than 18 °C
than 16,5 °C
than 5 °C
PROG
than 20 °C
than 22 °C
than 23,5 °C
In either case, the temperature setting values can be changed
at any point in time (see paragraph 5.7).
Fig. 25
PROG
Winter Summer
blinks.
DAY
R
Blinking
DAY
R
Keep pressed
G
B
35