Mestra R-080110 Manual Del Usuario página 14

English
If we want to store the programs of the example graphics (Fig. 10) and carry out the second program, the
parameters should be the following:
Step Parameter
C1
Step 1
t1
C2
Step 2
t2
C3
Step 3
t3
C4
Step 4
t4
C5
Step 5
t5
C6
Step 6
t6
C7
Step 7
t7
C8
Step 8
t8
C9
Step 9
t9
C10
Step 10
t10
C11
Step 11
t11
14
Value Meaning
0 ºC Initial temperature
-8 Step in which the furnace will start working
0 ºC Initial temperature
30 min. Time selected to reach the next temperature
400 ºC First set-up temperature
15 min. Time selected to reach the next temperature (maintenance)
400 ºC First set-up temperature (maintenance)
30 min. Time selected to reach the next temperature
1000 ºC Second set-up temperature
15 min. Time selected to reach the next temperature (maintenance)
1000 ºC Second set-up temperature (maintenance)
15 min. Time selected to reach the next temperature
600 ºC Third set-up temperature
-121 End
0 ºC Initial temperature
15 min. Time selected to reach the next temperature
500 ºC First set-up temperature
60 min. Time selected to reach the next temperature
1500 ºC Second set-up temperature
20 min. Time selected to reach the next temperature (maintenance)
1500 ºC Second set-up temperature (maintenance)
-121 End
Fig 10