Regular Maintenance - Matco Tools RAT FINK Manual De Instrucciones

HYDRAULIC JACK MAINTENANCE GUIDE
IMPORTANT: Service jacks are designed for lifting purposes only;
always support raised load with jack stands.

REGULAR MAINTENANCE

• Monthly or as necessary (depending on usage)
#1 Using a grease gun, add grease to grease fitting in the lift arm pivot shaft.
(Use a multi-purpose NLGI type grease only.)
#2 Lubricate all linkages and pivot points.
(Use white lithium spray grease only.)
#3 Remove handle; lubricate handle receptacle and handle end.
(Use white lithium spray grease only.)
#4 Lubricate both rear casters, bearings and both front wheels.
(Use white lithium spray grease only.)
Tighten all accessible hardware.
#2
#4
MLPJ35TRF
MLPJ35TRF Rat Fink 3.5 Ton Low Profile Jack
#2
#1
#2
4
#3
#2
#4
04/09/18