Sevylor TAHITI Manual De Utilización página 6

FITTINGS
Model illustrated:
Tahiti™ Plus Pro
Removable aft spray skirt
with stowage straps
Drain plug
Mini Boston
valve for
partitioned
bottom
Boston valves for
3
side chamber
Model illustrated: Riviera™,
Tahiti™, Tahiti™Plus
M
o
Removable aft spray skirt
d
with stowage straps
e
l
i
l
l
E
u
N
Drain plug
s
G
t
L
Mini Boston
r
Boston valves for
I valve for
a
side chamber
partitioned
t
S
bottom
e
H
d
:
T
a
h
All models are supplied with a repair kit.
i
t
ASSEMBLY INSTRUCTIONS / INFLATION
i
T
M
 Do not use a sharp tool!
 Any use of an air compressor will damage your product and automatically void all warranties.
For the first inflation and in order to get acquainted with your new product, inflate indoors at room temperature (about
20 ° C) where the PVC will be soft and assembly process made easier.
If it was stored at a temperature below 0° C / 32° F, leave it at 20° C / 68° F for 12 hours before unfolding. Inflate it with
an inflator from Sevylor
and other low pressure inflatables. These types of inflators will have a hose and adapters to fit the valves on this product.
Choose a smooth and clean surface to unfold your product.
1. Fold the fore and aft spray skirts back over the boat, then fasten each end of each skirt in the spray skirt fasteners
(see figure below).
2. Your boat is equipped with two different types of valves:
Boston valves for
side chamber
Spray skirt
fastener
2
4
1
2
Spray skirt
fastener
Fore and aft spray skirt fastening cords
Boston valves for
side chamber
Spray skirt
fastener
2
3
1
2
Spray skirt
fastener
Fore and aft spray skirt fastening cords
®
or any inflator designed for inflatable kayaks, rafts, pool floats, air beds, camping mattresses,
Inflatable seat
TM
(Tahiti Plus: 3)
Spray skirt fastener
4
Inflatable seat
TM
(Tahiti Plus: 3)
Spray skirt fastener
3
CAUTION!
6
Removable fore
spray skirt
Mini double
lock valve on
spary skirts
3
Spray skirt fastener
Removable fore
spray skirt
Spray skirt fastener
Figure 1