Fora G20 Manual De Instrucciones página 36

STEP 5. Obtain an Accurate Result in 7 Seconds
The result of your blood glucose test is shown after the
meter counts to 0. This reading is automatically stored in
the meter.
˙Do not push your finger (with blood on it) against the test strip or try to
apply a smeared sample on the test strip.
˙If you do not apply a blood sample to the test strip within 3 minutes, the
meter will automatically turn off. You must remove and reinsert the test
strip to restart the test procedure.
˙The blood should completely fill the confirmation window before the
meter begins to count down. If you find that the confirmation window is
not filled with blood when the meter is counting, NEVER try to add more
blood to the test strip. Discard the test strip and retest with a new
one.
˙If you have trouble filling the test strip, please contact the customer
service for help.
36
NOTE