Fora G20 Manual De Instrucciones página 37

STEP 6. Eject the Used Test Strip
After finishing the measurement, you can either take out the used strip by simply
sliding up the Strip-Ejection button or remove the test strip directly with your hand.
"OFF" is shown after the used strip is ejected and the meter will shut off automatically
afterward.
STEP 7. Remove the Lancet
Always use caution when removing the lancet.
Take the lancet out carefully. Place the disk on a hard surface and push the exposed
tip into the protective disk.
The used lancet and the used test strip may be potentially biohazard.
Please discard it carefully according to your local regulations.
WARNING
37