INSTALLATION
1. Connect the 16-pin harness into port A.
2. Connect the 14-pin harness with stripped leads into port B.
3. Connect the 5853 harness into port C, and then to the wiring harnesses in the vehicle.
4. Port D is a Micro-B USB input for updating the interface.
16-Pin
A
Harness
D
Micro-B USB Port
for Updating
8
5853
C
Harness
B
14-Pin
Harness
PROGRAMMING
1. Open the driver's door, and keep open during the programming process.
2. Cycle the ignition on and wait until the climate control lights turn blue.
Note: If the lights don't turn blue, unplug port C from the tactile panel for a few seconds,
then try again.
3. Test all functions of the installation for proper operation, before reassembling the dash.
|
386.257.1187
MetraOnline.com