Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Receptores para Coches
  5. 99-75175
  6. Instrucciones de instalación

Metra 99-75175 Instrucciones De Instalación

Ocultar thumbs

Publicidad

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 99-7517S
99-7517S
KIT FEATURES
•
DIN Head Unit Provisions With Pocket
•
ISO DIN Head Unit Provision With Pocket
•
DDIN Head Unit Provisions
•
ISO Stacked Head Unit Provisions
•
Painted Silver To Match Factory Finish
KIT COMPONENTS
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) DDIN Brackets
• E) DDIN Trim Plate • F) (6) Panel Clips • G) Pocket
A
• Panel Removal Tool • Phillips Screwdriver • Socket Wrench
METRA. THE WORLD'S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
APPLICATIONS
MAZDA BT-50
2006-UP
B
E
WIRING & ANTENNA CONNECTIONS (Sold Separately)
• 70-7903 - Mazda 2001-Up Wire Harness
TOOLS REQUIRED
C
D
F
metraonline.com
G

Publicidad

loading

Manuales relacionados para Metra 99-75175

Resumen de contenidos para Metra 99-75175

  • Página 1 • E) DDIN Trim Plate • F) (6) Panel Clips • G) Pocket WIRING & ANTENNA CONNECTIONS (Sold Separately) • 70-7903 - Mazda 2001-Up Wire Harness TOOLS REQUIRED • Panel Removal Tool • Phillips Screwdriver • Socket Wrench METRA. THE WORLD’S BEST KITS.™ 1-800-221-0932 metraonline.com © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION...

  • Página 2: Tabla De Contenido

    • ISO DIN Head Unit Provision ....4 • DDIN / Stacked ISO DIN Head Unit Provision ..5 CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

  • Página 3: Mazda Bt-50 2006-Up

    (Fig. B) Remove the fresh air and recirculation air stickers from the factory panel and place them in the appropriate locations on the Metra kit. Remove the hazard button and AC/ defrost buttons from the factory panel, and install them onto the Metra kit.

  • Página 4: Mazda Bt-50 2006-Up

    99-7517S KIT PREPARATION MAZDA BT-50 2006-UP Attach the (6) panel clips to the 99-7517S radio housing. (Fig. A) Continue to kit assembly....

  • Página 5: Din Head Unit Provision

    (Fig. B) Slide the aftermarket head unit into the cage and secure. (Fig. B) Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS.

  • Página 6: Iso Din Head Unit Provision

    (Fig. C) Snap the Trim plate into the Radio Housing. (Fig. C) Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. Reassemble dash in reverse order...

  • Página 7: Ddin / Stacked Iso Din Head Unit Provision

    Snap the Double DIN trim plate into the radio housing. (Fig. C) Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
  • Página 8 INSTALLATION INSTRUCTIONS FOR PART 99-7517S NOTES...