Kohler K-7514 Guia De Instalacion página 10

Troubleshooting (cont.)
Symptoms
3. Constant water flow.
4. Sporadic water flow.
5. Sensor flashes once
approximately every
2 seconds. The
product continues to
operate.
6. Sensor flashes once
approximately every
2 seconds. The
product does not
operate.
1124217-2-D
Probable Recommended Action
Causes
B. Supply B. Check incoming water
pressure is pressure. Pressure should
low. be at least 20 psi (137 kPa).
C. Aerator is C. Remove the aerator and
plugged. clean it. For
calcium/mineral deposits,
soak the aerator plastic
insert in a 50:50 mixture of
vinegar and water. Soak
only the insert and no other
components.
A. Filter is A. Clean or replace the
plugged. filter.
B. Diaphragm B. If the diaphragm is cut
seal is or torn, order a new
damaged or diaphragm assembly. Clean
dirty. or replace the diaphragm.
C. Solenoid is C. Order and install a new
not working. solenoid assembly.
A. The faucet A. Verify that the faucet is
is angled mounted according to the
incorrectly to installation directions.
deck or Ensure that the faucet is
misaligned installed in a position that
with user is above the rim of the sink.
area.
B. The wires B. Remove the spout and
are pinched verify that the wires are
or damaged. tucked inside the spout
before reassembling.
A. The HEC A. Replace the HEC.
power is low.
A. The HEC A. Replace the HEC.
power is
insufficient to
allow the
product to
operate.
10 Kohler Co.