Installation Information - Utilitech GYQ27-W Manual De Instrucciones

INSTALLATION INFORMATION

● CAUTION: To avoid water damage and the risk of electrical shock, the motion sensor controls
must be facing the ground when the installation is complete.
The detector is less sensitive to motion directly toward it and more sensitive to crossways motion.
ASSEMBLY INSTRUCTIONS
1. Turn OFF power to work area at main circuit breaker or fuse box.
CAUTION: Do not rely on wall switch alone to turn off power.
2. Rotate the sensor (A) to connect it to the
fixture (not included), then tighten the
clamp screw. Electrical load: up to 4.2 A,
504W maximum tungsten or
incandescent, 1.25 A, 150W maximum
dimmable LED or CFL.
2
3
1