Fontanot genius ra 010 Instrucciones Para El Ensamblaje página 13

parts 047089 and 031070; cut in height if necessary; the 047087 base and 047085 terminal must be the
same length; consider at least 25 cm for insertion of 047085 terminal in 047087 base. Drill the support
with a 13 mm bit and fix the 047089 support bracket with parts 011062, 009008 and 005009. Use a 9 mm
bit for parts 047085 and 047087 and assemble the blocking component with items 046046 and 004052.
b) Fix the staircase to the wall using the 047087, 047085 telescopic post with parts 046029 and 006001;
drill the wall with an 18 mm bit and enlarge the hole entrance to a diameter of 19mm and a depth of 15 mm
to hold the 006001 tightening nut. Fit parts 006001 onto stays 046029 without reaching the ends; fix to the
wall with chemical resin, wait until dry, and definitively tighten parts 006001. Drill the support with a 13 mm
bit and fix the 047089 support bracket with parts 011062, 009008 and 005009.
13 - Genius 030 - 040 RA
030-040_GENIUS_MY_RA.indd 13 09/12/11 14.29