Waldbeck Aquaklar Manual Del Usuario página 22

EN
Assembly and connection of the pressure filter
Choose a suitable location for the pressure filter. Please note the following
points.
Install the filter so that it is protected from flooding. Secure your filter so that
it does not fall into the pond. It should be placed at least 2 m from the edge of
the pond.
Place the filter on a firm and level surface, for example, on a plate. The filter
can also be buried up to the level with the filter box.
Ensure that there is unobstructed access to the lid when working on the
filter, as well as when cleaning the filter sponges and connecting hoses.
Connecting hoses
Use the selection chart to decide which tubing diameter you need. Operate
the filter only with pressure hoses approved for a pressure of 0.2 bar, or the
maximum pressure of the pump.
We recommend warming the hose with hot water, pushing it onto the spiral
hose adapter and securing it with a hose clamp. This makes the connection
more watertight.
To avoid pressure loss, cut the spiral graduated hose adapter into the
appropriate location for each hose.
22