Waldbeck Aquaklar Manual Del Usuario página 26

EN
Cleaning the quartz tube
1. Diconnect the mains plug of the filter.
2. Open the lid of the filter.
3. Remove upper filter plate and filter sponges.
4. Remove the upper container.
5. Clean the quartz tube with a damp cloth.
6. Set up all part of the filter as follows.
7. Put the pressure filter back into operation.
Replacing the UVC lamp
The UVC lamp must be replaced after 8,000 hours of operation in order to
ensure that the filter continue to operate with optimum effectiveness.
1. Loosen the 8 screws of the filter cover and the handle. Remove the lamp
from the filter cover.
2. Pull out the UVC lamp and replace the lamp.
3. Insert the UVC filter into the filter cover and fasten the 8 screws.
4. Restart the filter.
26