6 Control and Display
6.1 Control Panel
Notes:
"AIR" function is an optional function of indoor unit, for the unit without such function, this function is invalid;
"E-HEATER", "ROOM", "OFFICE", "RESTAURANT", "COMMON" are obligate functions of indoor unit that cannot
be set.
6.2 Operational Instruction
6.2.1 Start up and close down the unit
Press "ON/OFF" button to start up the unit. Press "ON/OFF" button to close down the unit.
6.2.2 Mode Setting
Under power-on status, each time press "Mode" button, the mode will be switched according
to the following order circularly:
Notes:
① Only the master indoor unit can set auto mode;
② Under auto mode, if the indoor unit is in auto cooling, the "
is in auto heating, the "
6.2.3 Setting of Light ON/OFF Function
(1) Light ON/OFF Function: can set the ON and OFF of light for display panel.
(2) Under power-on or power-off status, press "Light" button to turn on and turn off the light of
display panel.
(3) When the light of display panel is turned off, press the other buttons other than "Light"
button, the light on display panel will be turned off after 5 seconds.
6.2.4 Temperature Setting
Press "▼"or"▲" buttons under power-on status, the set temperature will be increased or
decreased at 1℃ each time; when long press the buttons, the temperature will be increased or
decreased at 1℃ every 0.3 seconds. The temperature setting range is: 16℃~30℃.
Notes:
Under auto mode, the temperature cannot be set through pressing "▼"or"▲" buttons.
6.2.5 Function Setting
Press "Function" button under power-on or power-off status, it can enter into function setting
status. Under function setting status, press "ON/OFF" button or without pressing any buttons for
consecutive 5 seconds, it will quit the function setting status.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
" icons are on.
"and"
11
Multi VRF Floor Standing Indoor Unit
" icons are on; if the indoor unit
"and"