Makita UR002G Manual De Instrucciones página 14

Noise
Model UR002G
4-tooth blade
Nylon cutting head
Plastic blade
Model UR003G
4-tooth blade
Nylon cutting head
Plastic blade
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Cutting tool
Cutting tool
Sound pressure level
(L ) dB(A)
pA
L dB(A) Uncer-
pA
tainty (K)
dB(A)
74.4 1.9
72.2 1.7
74.4 0.7
Sound pressure level
(L ) dB(A)
pA
L dB(A) Uncer-
pA
tainty (K)
dB(A)
74.4 1.9
72.2 1.7
74.4 0.7
14 ENGLISH
Sound power level (L ) Applicable
WA
dB(A)
L dB(A) Uncer-
WA
tainty (K)
dB(A)
87.6 0.3 ISO22868
(ISO11806-1)
89.7 2.2 ISO22868
(ISO11806-1)/
EN50636-2-91
85.3 0.8 ISO22868
(ISO11806-1)/
EN50636-2-91
Sound power level (L ) Applicable
WA
dB(A)
L dB(A) Uncer-
WA
tainty (K)
dB(A)
87.6 0.3 ISO22868
(ISO11806-1)
89.7 2.2 ISO22868
(ISO11806-1)/
EN50636-2-91
85.3 0.8 ISO22868
(ISO11806-1)/
EN50636-2-91
standard
standard