Publicidad
Idiomas disponibles
Idiomas disponibles
7. Install batteries.
a. Install 4 new AA Alkaline batteries.
Install the new batteries as
sure batteries lie flat in holder. For best performance,
rechargeable batteries are not recommended.
Alkaline Battery WARNING:
put in backwards, disassemble, mix with used or other battery types. May
explode or leak and cause personal injury.
IMPORTANT: DO NOT SKIP THE FOLLOWING STEP.
LOCK WILL NOT BE ABLE TO OPERATE PROPERLY!
8. Automatic - Bolt Direction Determination (Door Handing).
● In the steps below, the Smart-
Code mechanism automatically
determines the "door handing" and
sets the proper direction for motor to
rotate.
a. Press and hold the "LOCK" button on the exterior keypad, while fully in-
serting the battery pack into the interior assembly (the tabs on the pack must
face out - see illustration).
LOCK
Button
b. When the unit begins to operate the bolt, release the "LOCK" button.
c. Do not disturb the unit for approximately 20 seconds until the interior
Green LED flashes followed by a beep. During this time the system will drive
the bolt several times, will determine "door handing", store data in memory
and exit. It is very important that this process is allowed to finish
properly.
indicated in illustration. Make
Tab
1
O R
R I
T E
E X
Do not dispose of in fire, recharge,
LEFT HAND DOOR
(LHD)
Battery Pack
LED
2
RIGHT HAND DOOR
2
I N
T E
R I
O R
Continued
1
(RHD)
5
Publicidad
