Clock Mode; Date Mode; Daylight Saving Time Mode - Tork DPC201 Manual De Instrucciones

PROGRAMMING YOUR
NOTE: AFTER MAKING ANY CHANGES TO THE PROGRAM, PRESS MODE
TO GO TO AUTO (AUTOMATIC) MODE AND THEN PRESS EVENT TO
UPDATE THE LOAD STATUS.
AT POWER UP:
When powering up the unit for the first time, 12:00 will flash on the
display. NOTE: Allow 1-2 minutes for the supercap to charge before any
display is shown. Press reset button after 2 minutes if screen is blank
.
image on page 1)
Press the MODE key
1.0

CLOCK MODE

Press HOUR and MIN to advance to the present hour and
minutes. Check AM/PM, and press ENTER.
2.0

DATE MODE

If you are setting for the first time, display will show:
Press MONTH, DATE, and YEAR key to advance to the
desired month, date and year, then press ENTER.
NOTE: The day of the week will be automatically set once the date
is set.
3.0

DAYLIGHT SAVING TIME MODE

After setting or modifying the date, display will show:
For standard USA daylight savings (DSt), press MODE then
go to step 4.0. If daylight saving time (DSt) is NOT required,
press DEL display will show:
Press the ENTER key.
DPC201
AM
CLK
DATE
OFF
SU
ON
To modify standard USA
daylight savings dates.
Call technical support
888-500-4598
(see
3