Festo SLTE Serie Instrucciones De Utilizacion página 28

SLTE−...
With all applications:
Make sure that the device is fitted free of
S
mechanical stress and distortion.
Make sure that drive module 4 has suffi
S
cient space for heat dissipation.
Restricted mounting locations can cause
an accumulation of heat.
Avoid damaging the slide guide.
S
Damage to the slide guide will impair the functioning of the roller bearings.
Select one of the following fastening methods:
S
Direct fastening
from above through the
slide and the through
holes
Fasten the SLTE−... at every hole 7.
Tighten the fastening screws to an equal extent.
Fig. 8
28
*)
*) If the slide is pushed into the retracted end position, the through holes
will be easily accessible.
Fig. 7
from below into the
threaded holes
Fastening with adapter
plates
Festo SLTE−... 0501NH English