Human Touch perfect chair pc085 Manual De Uso Y Cuidado página 4

get ready
Unpack the box
Chair Seat pad
NOTE: You will need a Phillips-head screwdriver to complete these assembly instructions.
ATTACH THE SEAT PAD
1. Slide the seat pad onto the chair frame.
Slide the seat pad onto the lower part of the
chair frame, making sure that the frame
slides into the fabric pocket located on the
bottom side of the pad.
2. Secure the side flaps.
Push the flaps located at the top corners
of the seat pad down between the pad and
the chair arms, around the chair frame,
then secure them using the hook and loop
fasteners.
humantouch.com
Headrest frame Backrest pad Headrest pillow
Flap
4
Your Human Touch Perfect Chair
assembly. Just attach the headrest frame, seat and
backrest pads, and head pillow, and you're done!
3. Locate the rear flap.
At the top center of the seat pad, fold the top flap
forward, to enable you to reach the rear flap.
4. Secure the rear flap.
Wrap the rear flap around the frame by tucking it under the frame, pulling it up and toward you,
then attaching it to the seat pad using the hook and loop fastener.
5. Position the top flap.
Lay the top flap back flat against the backrest frame.
6. Secure the bottom straps.
Attach the two straps on the bottom of the seat
pad together using the hook and loop fasteners.
5 5
requires some simple
Rear
Top flap
Top flap