Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Brief instructions
• Connect the lamp head to the lamp head socket.
• Press the switch
• Choose the desired energy level with the controls
automatically dump if the energy level is lowered.
• Connect sync cord or flash meter to the sync socket
• Activate the photo/IR cell
• Activate the audible signal by pressing the button
14
• Pressing the test button
• The Battery Indicator
• There are three modes for the modeling light. Press the switch
for external power for modeling light or press
modeling light. If you don't want modeling light switch
• To set radio channel, within 30 seconds from power on, press and hold the PocketWizard
Transmitter TEST button (up to 4 seconds) until flash triggers. If using a Sekonic meter with
Radio module as a Transmitter, press the measure button repeatedly within the 30 second
learning period until the flash triggers.
• Press and hold down the button
automatically turns off after 120 minutes when not in use.
Connecting lamp head
One lamp head can be connected to the lamp
head socket. When connecting the lamp head
plug to the lamp head socket, align the dots on
the plug with the white dot on the generator
panel. Push the plug all the way in. Secure by
turning the locking ring on the plug clockwise.
Battery and battery charging
The battery can be charged separately or
with the battery in place through the mains
outlet by using the standard Profoto Charger
1A which takes 5 hours to charge the battery
or the Profoto Charger 2A which charge the
battery within 2.5 hours. The generator can
be used during charging and cannot be used
without a battery in place. The battery will not
deteriorate from being charged frequently
For more information, visit www.profoto.com
ON (9)
to start. The ready lamp
(6)
by pressing the button
(8)
will trigger a flash.
(10)
shows the battery charge level.
ON (9)
for 2 seconds to turn off the generator. The generator
(8)
will light up when the generator is ready.
ENERGY (12,13
). The generator will
SYNC
(5).
SLAVE
(7).
SOUND
(14).
MODEL (11)
MODEL (11)
to
BAT
for battery use only for the
MODEL (11)
to OFF.
CONNECTING LAMP HEAD
GENERATOR CHARGING
Profoto
Generator
Charge
Socket
to
EXT
AcuteB
R
CHARGE
EXT
>
Publicidad
Capítulos
Tabla de contenido
