Frequently Asked Questions (Faq) - TP-Link AP300 Guía De Instalación Rápida

LED
2.4GHz and 5GHz
Ethernet
WPS/Signal
Strength
LED Button:
Press this button to turn on or turn off the
LEDs.
Default Wireless Network Information:
The default case-sensitive SSIDs (Network
Names) and Wireless Password/PIN are
printed on the product label.

Frequently Asked Questions (FAQ)

Q1. How do I restore the AP device to its factory default settings?
With the device powered on, use a pin to press and hold the Reset button for five
seconds until the Power LED starts blinking, then release the button.
Status Indication
AP/Multi-SSID mode
On The 2.4GHz and 5GHz wireless are working properly.
Off
The 2.4GHz and 5GHz wireless are disabled.
Repeater/Bridge/Client mode
On The host AP's 2.4GHz or 5GHz network is selected.
Off
The host AP's 2.4GHz or 5GHz network is not selected.
On A device is connected to the Ethernet port.
Off No device is connected to the Ethernet port.
WPS operation indicator
Slow blinking
WPS connection is in process.
On
WPS connection is successful.
Quick blinking
WPS connection fails.
Signal strength indicator (Repeater/Bridge/Client
mode)
Solid blue
The signal strength is good.
Solid orange
The signal strength is too weak.
Off
The device is disconnected from the host network.
9
English