TP-Link AP300 Guía De Instalación Rápida página 8

English
Before your start
Which mode do you need? Please refer to the table to choose a proper mode.
You want to convert your wired (Ethernet) network
to a wireless network.
You are in a Wi-Fi dead-zone or a place with weak
wireless signal. You want to have a greater effective
range of the wireless signal throughout your home
or office.
You have a wired device with an Ethernet port and
no wireless capability, for example, a Smart TV, Media
Player, or game console. You want to connect it to
the Internet wirelessly.
Configure the AP Device
Note: AP500 is used for demonstration in this installation guide.
AP Mode (Default)
The AP dev ice transforms your wired network into wireless.
Internet
Wired Router
1. Connect the AP device according to steps A to D in the diagram.
2. Turn on the power and wait until the Power ( ) and Wireless ( & ) LEDs are lit
and stable, use the default SSID and Password printed on the product label to
join the AP device's Wi-Fi network.
Note: You can enjoy the Internet surfing now. For your wireless network security, it is recommended
to change the default SSID (network name) and the password of your Wi-Fi network. To do so,
perform the following steps.
Scenarios
B A
AP Mode (Default Mode)
Repeater/Bridge Mode
Client Mode
AP500's SSID
C
6
Operating Modes
D