Sangean RCR-5 Instruccion De Manejo página 6

Operation
Clock Setting (date and time)
Clock time has to be set before alarm setting.
1. Press and hold the TIME SET button for more than 2 seconds,
the display will show
2. Press TUNING Up/Down button to set the year.
3. Press the TIME SET button, then use the same way to set
the date.
* press and hold the TUNING Up/Down button for fast-forward
or fast-backward.
4. Press the TIME SET button to set the hour with TUNING
Up/Down button. Same way (press TIME SET then TUNING
Up/Down ) to the minute. The day of week is automatically set.
5. After the minute is set, then press the TIME SET button to
complete the setting.
While setting, the setting will be cancelled after 30 seconds
without pressing any buttons.
After the time is under setting, the setting won't be cancelled
even you don't press any button for more than 30 seconds.
You need to press the TIME SET button to complete the
setting, and the second digit will be set to 0 at the moment
when you press the TIME SET button.
5
, and flash the year digits.