Warnings And Safety Instructions - MoJack EZ Max Instrucciones Para El Montaje Y La Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MoJack EZ Max Lift
Introduction
This manual contains assembly, parts, operating,
maintenance, adjustment and safety instructions
for your MoJack EZ Max lift.
BEFORE USING YOUR MOJACK EZ MAX,
CAREFULLY READ THIS MANUAL IN ITS
ENTIRETY.
By following these operating, maintenance and safety
instructions, you will prolong the life of your MoJack
lift and promote safe operation.
If additional information is needed, or should you
require a trained service mechanic, contact your
authorized MoJack equipment dealer or distributor
or call MoJack at 1-877-575-3173.
All MoJack parts are thoroughly tested and inspected
before leaving the factory to ensure that they comply
with all relevant safety standards.
NOTE: Please save this manual for future reference.
NOTE: Location of unit Serial Number.
Need Assistance?
Please DO NOT return this product to the store.
Our Customer Service Department is ready to help!
1-877-575-3173
Submit your questions online at:
www.theMoJack.com
Patent #: U.S., 8,448,920
Patent #: U.S., 8,387,953
© 2013 (MoJack Distributors, LLC)
MoJack and the MoJack logo are registered trademarks of MoJack Distributors, LLC.
MoJack EZ Max is a trademark of MoJack Distributors, LLC. All rights reserved.
2

Warnings and Safety Instructions

Read and understand all safety and operating instructions before using the MoJack EZ Max.
Never allow anyone unfamiliar with the safety or operating instructions to use the MoJack EZ Max.
Follow all safety and servicing instructions provided by the lawn mower's manufacturer before using
the MoJack EZ Max.
Do not modify the MoJack in any way. Any modifications will void any and all warranties and could
compromise your personal safety.
When using the MoJack EZ Max, keep ALL bystanders at a safe distance away from the MoJack EZ Max.
The MoJack EZ Max must be used on a solid level surface.
Do not lift the front end and the back end of the mower at the same time.
Only use the MoJack EZ Max for mowers that are less than 450lbs front end weight and properly fits in the
provided wheel pads. (ie. 10" to 17" diameter and with inside to outside wheel measurements of 18.5" to 47.5").
Always stop engine and remove key before beginning any work on the mower.
Always place mower in neutral or disengage the hydraulic drive by following the mower owner's manual.
Never operate the engine while using the MoJack EZ Max.
Do not exceed the lifting capacity of 450 lbs. front end weight.
If the MoJack EZ Max Tower is leaning while lifting or lowering the mower, this indicates an overload condition.
Remove the mower immediately.
Tower must be secured in place with the Tower Clevis Pin before using the MoJack EZ Max.
Carrier Locking Handle must be locked into Tower before starting any service on mower.
Do not remove safety warnings or decals from MoJack EZ Max.
Before each use, always check for any worn, loose or damaged parts on the MoJack EZ Max. If any damaged
parts are present, do not use the MoJack EZ Max and contact MoJack at 1-877-575-3173.
Do not climb on mower while it is lifted, being lifted or being lowered.
No one should be on the mower while it is lifted, being lifted or being lowered.
After the mower is raised to a working height, always place wheel chocks (not included) behind the back tires of
the mower.
Wheel Pads must be equal distance from the Lift Arm to maintain proper balance.
Remove all mower attachments before using the MoJack EZ Max.
Some mowers which are equipped with a fuel tank vent may spill fuel when lifted. If this happens, run fuel level
down in the tank to prevent spilling.
Failure to follow these warnings may result in property damage and serious bodily injury or death.
IMPORTANT: The MoJack EZ Max is intended for use with mowers only. Do not exceed 450 lbs. front end weight.
It should never be used to service mowers with a front end weight over 450 lbs.
MoJack EZ Max Lift
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

45001

Tabla de contenido