Bluetooth ® Connection; Viewing Sessions - Tru-Test SRS2 Guia De Incio Rapido

Bluetooth
5
The stick reader will automatically connect to any Tru-Test
which it has previously been paired (when in BT Auto mode - default).
In order to manually establish a
having trouble establishing a
1. With both devices off, position the stick reader close to the other device.
2. Switch on the device and, if necessary, check that its
3. Switch on the stick reader.
4. Select Settings, then Bluetooth to display the Bluetooth Settings screen.
5. Select Search for devices.
A list of available devices will be displayed.
6. Select a device.
Wait for up to one minute until the two devices are paired. When pairing is complete, the
light above the Read/Select button will illuminate blue.
7. Use the stick reader to scan an EID tag in order to test the connection.

Viewing sessions

6
You can view information collected during a session in the Sessions screen.
1. If necessary, press
2. Select Sessions.
A list of sessions is displayed.
3. Select a session to view:
4
®
connection
Bluetooth
wireless connection (if you are using a non-Tru-Test weigh scale indicator, or you are
Bluetooth
wireless connection):
Always turn on the device you are trying to pair with first, BEFORE the stick reader.
to go to the Home screen.
Bluetooth
enabled weigh scale indicator, or any other device, with
Bluetooth
setting is enabled.
Bluetooth
indicator