Designated Use; Technical Data - Abicor Binzel ABIMIG GRIP W 555 D Instructivo De Servicio

®
ABIMIG GRIP W

1 Designated Use

1.1 Technical Data

Welding
Transport and storage
Relative humidity
Tab. 1 Ambient temperature
Type of voltage
DC polarity of the electrodes
Shielding gas (DIN EN 439)
Wire types
Voltage rating
Protection type of the machine side
connections (EN 60 529)
Type of use
Tab. 2 General torch data according to EN 60 974-7
Type Type of
cooling
Double
circuit
®
ABIMIG
GRIP W
555 D liquid
555 liquid
605 D liquid
605 C liquid
605 liquid
Tab. 3 Product-specific torch data (EN 60 974-7) ABIMIG
1For pulse arcs, the load data are reduced by up to 30%.
MIG/MAG manual welding torches are used for safe welding of low- and
high-alloy materials. They consist of the torch neck with equipment parts and
wear parts, handle and cable assembly with central connector. They conform
to EN 60 974-7 and are not considered devices having their own functions. Arc
welding can only be carried out in connection with a welding power supply.
1 Wire 
Load ED
CO M21
2
A A % mm
550 500 100 0,8 - 1,6
575 525 100 0,8 - 1,6
600 550 100 1,0 - 1,6
600 550 100 1,0 - 1,6
625 575 100 1,0 - 1,6
- 10 °C to + 40°C
- 25 °C to + 55°C
up to 90 % at 20 °C
DC
Usually positive
CO and mixed gas M21
2
commercially available round wires
113 V peak value
IP3X
manual
Gas flow Cooling
Max. supply
temp.
l/min °C
10 - 20 40
10 - 20 40
10 - 20 40
10 - 20 40
10 - 20 40
®
GRIP W
1 Designated Use
Flow
pressure
Min. min. max.
flow
l/min bar bar
1,15 2,5 3,5
1,15 2,5 3,5
1,15 2,5 3,5
1,15 2,5 3,5
1,15 2,5 3,5
EN - 3