Silvercrest 313492 Instrucciones De Utilización Y De Seguridad página 37

submerge the shaping disk
water.
Do not bend the mains cable
using force, do not pull on it, do
not bundle it up or twist it and
do not place it under heavy
objects.
Do not put metal objects or flam-
mable substances in the mixing
chamber .
1
Separate the device from the
power supply when the device is
not in use.
The device is not intended for
use with an external time switch
or a separate telecontrol system.
Immediately remove the mains
plug from the socket if you see
smoke.
Do not unplug by pulling the
mains cable ; always hold by
3
the plug.
Keep the mains plug clean.
Do not place objects on top of
the device!
Do not move the device while it
is operating.
The device should always be
unplugged from the mains when
it is not supervised, and prior to
assembly, dismantling or cleaning.
Before substituting fixtures or ad-
ditional parts that move during
operation, the device must be
switched off and unplugged from
in
16
the mains.
Keep the device in a dry and
3
well-ventilated location after use.
on taste or smell.
ATTENTION: FIRE HAZARD
To prevent overheating, never
cover the device.
ATTENTION: DANGER OF
CUTS Moving mechanical parts
with high rotational speed! Pre-
vent injuries. Avoid touching any
parts while the device is in oper-
ation. Keep hands, hair, clothing,
dough scraper
utensils away from moving parts
during operation. Do not touch
moving parts, in particular while
the device is connected to the
mains. Do not put your fingers or
any objects into the device while
it is running. Risk of serious injury!
Do not open the lid
unscrew the shaping disk holder
to open the product, and do
9
not touch the mixing paddle
with your hands while the device
is operating. This could cause
serious injuries.
If parts get stuck, disconnect the
mains plug from the mains socket.
Then attempt to remove the
FOOD SAFE! This prod-
uct has no adverse effect
and other
14
, do not
4
5
GB/MT 37