SentrySafe Fire-Safe OA5835 Manual Del Usuario página 7

Programming Your Code(s)
Programming the secondary code
NOTE: • Up to 6 secondary codes can be programmed. Only 1 code can be programmed
at a time.
• "PRG" ( PRG
programming a manager or user code.
• To return to the beginning when programming your code, wait 5 seconds and the lock
will time out. You may then start over.
) lights up after pressing the "Prog/Enter>>" key and stays lit while
To ADD a secondary code:
A. Press the "Prog/Enter>>" key 2 times, enter the manager
code, and then press "Prog/Enter>>" key.
B. Use the <<or>> to scroll between the lighted boxes.
An empty box icon (
code entry.
A box with a star (
programmed.
C. Enter a 4-8 digit code in the selected position and press the
"Prog/Enter>>" key to finish.
To DELETE a user code:
A. Press the "Prog/Enter>>" key 2 times, enter the manager
code, and then press the "Prog/Enter>>" key.
B. Use the <<or>> to scroll to the A box with a star icon (
to be removed.
C. Press 0, 0, 0, 0, then the "Prog/Enter>>" key to delete the
selected user.
7
) means it is available for a
) means code has already been
*
)
*