Bolting Down Your Safe; Bolt Down Instructions - SentrySafe Fire-Safe OA5835 Manual Del Usuario

bolt down instructions

Warning: Product is not water resistant once it is bolted down. The ETL verified water
resistance claim applies to product prior to the application of a bolt-down kit.
bolt down kit contents (in select models only):
• 2 Lag screws.
• 2 Washers.
• 2 Masonry anchors.
Tools needed to bolt safe to the floor:
• Drill.
• Wrench.
• ⁄ " (11 mm) drill bit – for drilling into the safe.
7
16
• ⁄ " (7.2 mm) drill bit – for drilling into a wood floor.
9
32
• ⁄ " (9.5 mm) drill bit – for drilling into a masonry floor.
3
8
Warning: • DO NOT drill through bolt cups.
• DO NOT bolt through the walls.
• DO NOT drill from any location inside the safe.
1
Tip the safe onto its left side (door hinges horizontal with the floor).
2
3
Tip the safe upright, place the safe in the desired location, and open the door.
4

bolting Down Your Safe

Unlock the safe, and open the door. Look to the bottom of the
safe for two indentations on the feet in opposite corners. Using
the ⁄ " (11 mm) bit, drill a hole through each indentation
7
16
perpendicular to the bottom of the safe. Do NOT drill from
any location inside the safe.
Use a screw or pencil to mark the floor through both holes.
10