Atsumi Electric Tri Watcher SIR10SA Manual De Instalación página 2

2. NAMES OF PARTS AND THEIR OPERATIONS
Main device front
f
a
d
b
e
c
g
g
Main device rear
k
l
o
Main device rear
i
i
i
j
Mounting base
m
n
a Lens 1
This lens is for collecting the heat in the detection
i
area.
b Lens 2
This lens is for collecting the heat in the detection
area.
c Lens 1'
This lens is for collecting the heat in the detection
area.
d Alarm LED 1
h
This LED lights or flashes red to indicate the
operating status of the device.
e Alarm LED 2
i
This LED lights or flashes red to indicate the
operating status of the device.
f Cover
This is the front cover of the device.
g Lower cover
This is the bottom cover of the device.
h Small cover
i
This is the cover of the setting switches.
i Cover screw
These screws are used when removing the cover.
j Knockout
Break this knockout for wiring on the wall.
k Sensitivity volume
This adjusts the detection sensitivity.
l Dip switch
The dip switches are used to set the various
functions of the device.
m Alarm mode index
This index indicates the alarm mode.
s
Wide mode
n Board fi x screw
This is a screw for fi xing the board in place.
p
o Relay cable
This is a cable for connecting the main device
and mounting base.
p Terminals
These are terminals for the cable connection to
other equipment.
q Relay cable connector
q
This is a connector for connecting the relay cable
from the main device.
r Tamper switch
This is a switch that detects opening and closing
of the lower cover.
r
s Mounting base
This is used when mounting this device on a wall
or other object.
2
Pet Alley mode