Publicidad
STEP 2A Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injuries and property damage!
●
Drywall covering the wall must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
1.
Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to
edge stud finder.
2.
Position the wall template
tape in place.
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
1
≤ 5/8 in.
(16 mm)
12
at your desired height and line up the holes with your stud center line. Level the template and
14
2
14
NOTE: TV shifts
4.27 in. (108.6 mm)
to the right or left
when in the home
position. Consider
this when select-
ing the location of
your wall mount.
Wood Stud Option
14
3
14
T H IS
W A Y
U P
3 in.
.
(75 mm)
7/32 in.
(5.5 mm)
TH IS
W A Y
U P
Publicidad
