Changing Needle; To Check The Needle; Thread And Needle Chart - Baby Lock BL9 Manual Del Usuario

Changing Needle

CAUTION:
Turn off the power switch when changing a needle.
Raise the needle by turning the handwheel toward you
and lower the presser foot.
Loosen the needle clamp screw by turning it counter-
clockwise.
Remove the needle from the clamp.
Insert the new needle into the clamp with the flat side
away from you.
When inserting the needle into the clamp, push it up as
far as it will go and tighten the clamp screw firmly with
the screwdriver.
* Check your needles frequently for barbed or
blunted points. Snags and runs in knits, fine silks
and silk-like fabrics are permanent and are almost
always caused by a damaged needle.

To check the needle

Place the flat side of the needle on something flat (needle
plate, glass etc.). The clearance between the needle and
flat surface should be consistent. Never use a bent or
blunt needle.

Thread and Needle Chart

Light
Crepe de Chine,
weight
Voile,Lawn, Organdy,
Georgette,
Tricot
Linens, Cotton. Pique,
Medium
Serge, Double Knits,
weight
Percale
Denim, Tweed,
Heavy
Gabardine, Coating,
weight
Drapery and
Uphollstery Fabric
* In general, fine threads and needles are used for
sewing thin fabrics, and thicker threads and
needles are used for sewing heavy fabrics.
Always test thread and needle size on a small piece
of fabric which will be used for actual sewing.
* Use the same thread for needle and bobbin.
* When sewing stretch, very fine fabrics, and
synthetics, use a stretch needle.
The stretch needle effectively prevents
skipped stitches.
* When sewing very fine fabrics, sew over a piece
of paper to prevent distortion.
12
Fabrics
Thread
Fine Silk
Fine Cotton
Fine Synthetic
Fine Cotton
Covered Polyester
50 silk
50 to 80 Cotton
50 to 60 Synthetic
Cotton Coverd
Polyester
50 silk
40 to 50 Cotton
40 to 50 Synthetic
Cotton Coverd
Polyester
Needle
Size
9
or
11
11
or
14
14
or
16