Connections; Check The Raising Ability Of The Tractor - Cosmo P180 Manual De Uso Y Mantenimiento

4. CONNECTIONS

4. CONNECTIONS
Before coupling the machine to the 3-point hitch, positioning the safety devices to the tractor, so that it is
not possible the involuntary and/or accidental raising and lowering of the arms.
The 3-point hitch of the tractor and of the machine must coincide or must be adapted.
In proximity of arms rods of the back lifter of the tractor, there is the danger of wounding, because of
crushing and cutting points.
Do not use the external controls for the lifting of the machine.
During transport position block the lateral stop of the rods.
4.1. .1.

CHECK THE RAISING ABILITY OF THE TRACTOR

CHECK THE RAISING ABILITY OF THE TRACTOR
Check the raising ability and the stability of the tractor through the following formula and if it is
necessary please apply some ballasts on the back.
Centrifugal fertilizer spreader mod. P - PL
DANGER! DANGER!
It is obligatory to check the raising ability and the stability of the tractor ( It is obli gatory to check the raising ability and the stability of the tractor (before
carrying out the connection with the machine) in order to avoid the overturning carrying out the connection with the machine
and/or the loss of wheels grip. and/or the loss of wheels grip.
M s ≤ 0,2 T i + Z (d + i) M s ≤ 0,2 T i + Z (d + i)
M ≤ 0,3 T M ≤ 0,3 T
i i = Wheels base of the tractor
d d = Distance of load ballast back axle
s s = Bounce of the machine rear axle
T T = Tractor load + 75 kg (operator)
Z Z = Load ballast
M M = Machine load
) in order to avoid the overturning
before
15