How To Adjust The Spreading - Cosmo P180 Manual De Uso Y Mantenimiento

5.1.2. H 5.1.2. H
OW TO ADJUST THE SPREADING OW TO ADJUST THE SPREADING
The fertilizer spreading is regulated through the regulation lever that moves the opening section on
the bottom of the hopper.
In order to carry out the regulation, after having consulted the spreading table, according to the type of
product to spread and to the spreader speed, it is necessary to move the lever "A"
scale "E" "E" and blocking it in the chosen position with the pin "D"
In order to spread from both sides (ref.
through grip handle "C"
In order to carry out the spreading only through the left side (ref.
the two levers removing the "C"
spreading chart, and to bring the lever "B"
shutter of the right side.
In order to spread only on to the right side (ref.
and regulate the quantity to spread with the lever "B"
Distribution on right Distribution on
Centrifugal fertilizer spreader mod. P - PL
ref. I), "A"
"A" and "B"
"C".
"C" grip handle, to set the lever "A"
"B" towards the higher part (position 1) in order to close the
side (ref. III III)
right side
"D".
"B" levers must be in the same position, connected
ref. II II), it is necessary to disconnect
"A" in the chosen position, given by the
ref. III III) you have to move the lever "A"
"B".
Distribution on left side (ref. II II)
Distribution on left side
"A" along the graduated
"A" up, (in position 1)
19